• E-mail : infocz@hmsolarglass.com
  • 乐天堂手机版客户端 乐天堂手机版客户端
  • 日本語 日本語
  • ENGLISH ENGLISH
  • Your present position:Home >> Products >> Tempered Solar Glass

    Solar Module Use 3.2mm Tempered Super Clear Glass

  • Email Us Email Us:
  • infocz@hmsolarglass.com
  • TO SHARE:
  • Solar Module Use 3.2mm Tempered Super Clear Glass
  • Product Details:

    3.2mm Anti-Reflection Glass At Good Price, combined with nanometer anti-reflective coating technology,increase solar transmittance by way of decreasing light reflectance and improve the solar  cell phtotelectric conversion efficiency.Meanwhile,it reduces the reflected glare of the glass and the pollution caused by the reflectance to the environment. The hydrophobic behavior of the AR coating could in some degree protect the dust and dirt from shading the light and improve the cleaning performance of the glass. With the outstanding characteristics of the high solar lights transmittance, the low reflectance, the low iron, the high mechanical strenght and the high flatness, it is one of the indispensable important parts of solar cell and has been widely used to photovoltaic power generation all over the world.

    Products
    3.2mm Anti-Reflection Glass At Good Price
    Thickness
    3.2mm
    Size
    Can be customized,maximum size:1200*2200mm
    Solar transmittance
    3.2mm≥93.8%,with AR coating
    Applications
    For solar cell module
    Payment terms
    T/T
    Delivery
    Within 15 days after receiving the deposit 
    MOQ
    500 sqm
    Port
    Shanghai


    Features:
    1.High solar lights transmittance
    2.The low reflectance: visible light reflectance is less than 7.30%
    3.Low iron:glass has only 0.012% of iron content;
    4.High intensity,the strength is 3-5 times of ordinary annealed glass
    5.Wind pressure resistance: the wind pressure resistance is 1.5-3 times of ordinary annealed glass;
    6.Heat shock resistance: the heat shock resistance is 3 times of ordinary annealed glass;
    7.Safety:if it is broken, it usually breaks into relatively small pieces, which are less likely to cause serious injury.

    Production process:
    1.Raw Glass
    2.Edging and Cleaning
    3.Coating
    4.In-process Inspection
    5.Tempering
    6.Cleaning
    7.Packing
    8.Quality Control





    Test
    Standards
    Test method
    Results

    1
    Appearance
    EN1096-2
    Surface is clean, no scratches,spots or pinhole
    Qualified

    2
    Light transmittance
    ISO 9050
    The ratio after coating is higher than before >2.5
    >2.6

    3
    Adhesion
    ASTMD3359
    The cutting edge is very smooth , no grid slide,
    0 level

    4
    Pencil hardness
    ASTMD3363
    No thickness of film which scratched by pencil more than 3mm
    ≥6H

    5
    Salt spray test
    EN1096-2
    With 5%(±1)NaC1,under 35ºC,last 4-9days,record  the data before and after the test, T<1.0
    4 days,      T=0.57   9 days,      T=0.91

    6
    Thermal Cycle
    IEC61215/10
    Keep the temperature between -40ºC and 85ºC,±2ºC,200 times,(around 1000 hours),record  the data before and after the test,T<1.0
    T=0.48

    7
    Muggle Test
    IEC61215/10
    Under 85ºC,±2ºC,relative humidity is 85ºC,±5ºC,around 1000 hours,record  the data before and after the test,T<1.0
    T=0.63

    8
    Wet-cold test
    IEC61215/10
    Humidity is 85,±5ºC,temperature is 85ºC,±2ºC,fall to -40ºC,cycle for 10 times.Record  the data before and after the test,T<1.0
    T=0.80

    9
    Outdoor exposure
    IEC61215/10
    Test with the moniter in outdoor temperature,total radiation need to be 60kmh·m-2 .Record  the data before and after the test,T<1.0
    T=0.59

    10
    Mechanical Loading
    IEC61215/10
    Adding the load to 2400Pa and make it distributed.Keep 2-3 times;the layer wasn't broken and no serious defects in appearance
    Qualified



    Packing:
    1. Interlay paper between two sheets. 
    2. Seaworthy wooden crates. 
    3. Iron/Plastic belt for consolidation.

    Our service: 
    1.Reply your inquiry in 24 working hours.
     2.Customized design is avaliable ,OEM is welcome .
     3.Delivery the goods to our customer all over the world with speed and precision.
     4.Offer customer the products with good quality and competitive price.


    Immediately Consult

    Message *
    Name *
    Phone
    Email*
    Verification code *

    Other Products

  • top